Produk Ball Bearing Miniature Deep Groove Product Introduction


Miniature Deep Groove Ball Bearings Bearing spasi alur mikro sing nunjukake seri metrik, dhiameter njaba kurang saka 9mm; diameteripun diameter kurang saka 9.525mm macem-macem bantalan, materi utama yaiku baja karbon, baja bantalan, baja tahan karat, plastik, keramik, termasuk diameter sing paling cilik bisa rampung 0,6mm, dhiameter umum luwih saka 1mm.

Fitur Bola Tampung Miniature Deep Groove

Ing diameteripun mikro-bantalan ultra-cilik, miniatur bantalan poros alur mini ukuran 68 metrik seri, 69 seri, 60 seri, lan sanes-sanesipun, seri Inggris R 6 jinis, kanthi dasar menika saged dipérang dados baja bantalan baja ZZ seri, karo seri seri mini karet RS getah, seri seri bantalan Teflon lan seri seri lan sateruse.

Miniatur Deep Groove Ball Bearings Tujuan utama

Suitable for all kinds of industrial equipment, small rotary motor and other high-speed low-noise areas, such as: office equipment, micro-motor, instrumentation, laser engraving, small clocks, soft drives, pressure rotor, dental drill, hard drive Into the motor, video drums, toy models, computer cooling fans, Dianchao Ji, fax machines, and so the relevant areas.

Miniature Deep Groove Ball Bearings Miniatur bantalan kegagalan alasan

About 40% of the failed miniature deep groove ball bearings are caused by dust, dirt, debris contamination and corrosion. Pollution is usually caused by improper use and poor use of the environment, it can cause torque and noise problems. The failure of micro-bearings produced by the environment and pollution is preventable, and it is possible to determine the cause of such failure by simple visual observation. As long as the use and installation of reasonable, miniature bearing erosion is easy to avoid. The denudation is characterized by the indentation on the micro-bearing ring raceway resulting from an impact load or an incorrect installation. The denudation usually occurs when the load exceeds the material yield limit. If the installation is not correct so that a load across the micro-bearing ring will produce denudation. The pit on the miniature bearing ring also produces noise, vibration and additional torque.